Ramsey COM3010 Communications Service Monitor

 with AC cable, BNC-BNC Cable, Antenna, Battery

Now you can equip your laboratory with your monitor that has the functions and accuracy of analyzers that cost up to 4 times more.


-Power Meter: Automatically connects to a dummy load build-in for measurements up to 100 Watts
-Screen: 2 Graphic Fluorescent Screens to the void, 16 x 140 pixels 
-Flash Drives: Complete system for Flash drives, 100 sequences of 100 records 
-Mode of Scan: Allows the tracking of 100 stored frequencies
-Meter of SINAD: Verifies the sensibility of your radios without requiring additional equipment
-Counter of Frequency: It shows the frequency received and the error of range
of 100 kHz 3 - 1.0 GHz
-Battery Meter: It shows on the screen the charge of the battery, the one that allows operation of the equipment during a hour
-Self-calibration Meter of RSI: It shows the intensity signal (RSSI) within
a range of - 120 dBm to - 40 dBM

GENERATOR MODE
-Frequency: 100 kHz - 1.0 GHz in steps of 1 Hz
-Stability: ± 0.1 ppm standard
-Output: RF: -140 dBm to 0 dBm in steps of 0.1 dBm
-Precision: ± 1 dB of 500 kHz to 1 GHz, ± 2 dB of 100 kHz to kHz
-Units: dBm, mV
-Modulation FM: ± 75 kHz plus in steps of 0.1 Hz
-AM Bandwidth: 10 Hz - 10 kHz
-Precision: ± 5%
-Distortion: less to 5%

Modulations
-Internal: 0.1 Hz - 3 kHz
-External: 0.1 Hz - 3 kHz
-Coding of tones CTCSS: 0.1 Hz - 999.9 Hz with deviation of frequency variable of 0.1 Hz to 2 kHz 
-Coding of tones DCS: Generates the standard digital tones  with a fixed deviation of ± 750 Hz


RECEPTOR MODE

-Frequency: 100 kHz - 1.0 GHz in steps de 10 Hz
-Sensibility: Less to 2 mV below of 512 MHz, less to 3 mV up to 512 MHz
-Modulation FM: 0 - 7 kHz, 0-4 kHz 
-Modulation AM 0-100%
-Decoding CTSS: (in auto frequency count)
-Frequency error: 0-1 MHz, by 2 metods. Counter and bar graph

Frequency Count
-Range: 100 kHz - 1 GHz
-Low band Sensibility: Less to 5 mV below 50 MHz, less to 10 mV above 70 MHz resolutions of 1 Hz and 10 Hz
-High band Sensibility: Less to 6 mV above 200 MHz, less to 10 mV between 70 and 200 MHz. Resolutions from 10 Hz to 100 Hz

General Features
-Input to receiver: Contains diode protection and fuse
-Battery duration: 1.5 hours expandable to 4.5 hours
-Controls: Membrane elastic type
-Dummy load: 100 Watts, connected to the output of RF and the output. attenuated of 30 dB in the backside, 25 % d endless cycle to 100 Watts
-Power Supply: 100 - 240 VAC, 0.6 Amp. 50/60 Hz: In-build internal battery 
-Operating Temperature: -30 to 50° C