ICOM IC-F60V UHF Commercial 128 Ch Handheld 2-Way Radio
IP67 waterproof protection:
The gasket sealed waterproof housing provides superior IP67 waterproof protection (1m dept for 30 minutes). Reliable and dependable use in harsh conditions such as rain, snow, sudden change in temperature, makes the F50/F60 the radio for all situations.
Vibration alert function:
When a pre-programmed 2-tone/5-tone code or call from a specific user (MDC mode only) is received, the radio vibrates powerfully enough to be felt through heavy clothing. Available on specific versions only.
8 minute voice recorder:
When When a pre-programmed 2-tone/5-tone code or a SelCall (MDC mode only) is received, the voice recorder automatically starts recording the incoming message. You will not miss an important call even when you are temporarily away from the radio. You can manually start recording incoming calls and also your own message. It records up to a maximum of 8 minutes (Or up to 48 calls of 10 sec. recording time). Available on specific versions only.
128 Channels / 8 zones:
The large capacity of 128 memory channels with 8 memory zones allows you to divide and store a variety of channels from local to wide area network channels.
700mW audio output:
Loud 700mW* audio output with the built-in BTL amp. The built-in audio compander provides clear, low noise communications. Improved bass characteristics also betters the audio quality.
* Typical with internal speaker.
8-Character LCD display:
The 8-character alphanumeric display shows channel, bank, tone code and scanning channel names on the display. 7 operational icons on the sub-line show various status at a glance.
Lone worker function:
When the radio is not operated for a preset period (1 to 255 min.), the radio sounds a beep and requires you to push the emergency button. If the emergency button is not pushed for a preset time (1 to 255 sec.), an emergency signal automatically transmits and informs your co-worker or dispatcher that something may have happened to the individual worker.
se the built-in CTCSS, DTCS, 2-Tone, 5-Tone and MDC signaling capabilities to set up your talk group or selective calling. The IC-F50V can decode ten 2-Tone codes or eight 5- Tone codes on a channel. When a matched tone is received, the following actions are programmable for each code.